| Est. 2008 |
VIAVI - Vertex RF Channel Emulator
- • Modular architecture
- • Scalable from 2×2 up to 16×16
- • Freq Range: 380MHz to 3.85GHz
- • Low end extension down to 30MHz
- • High end extension up to 5.95GHz
- • Channel BW: 40MHz
- • Options 100, 200, 400, 600, 800, 1000 and 1200MHz
- • Doppler Shift: ± 4kHz
- • Options ± 12kHz and ± 1.95MHz
- • Delay 4msec
- • Option 2sec (40MHz) / 1sec (>40MHz)
More Product Information
• Two independent receivers and two transmitters in each unit.
• Transmit and receive frequency range of 1 MHz to 18 GHz.
• Up to 400 MHz instantaneous signal bandwidth on each transmitter and receiver.
• Each receiver is independently programmable in frequency, gain, and bandwidth.
• Each transmitter is independently programmable in frequency, power, and signal waveform.
• Large waveform storage capacity for full bandwidth recording and playback.
• Quick setup and configuration, operational in a matter of minutes.
• Compatible with standard universal AC power, vehicle power, and battery power.
• BB2590 battery operation for extended field use.
• Compatible with Ranger Signal WorkShop™ waveform files.
• Compatible with Ranger EMS Sequencer (Vignette Planning & Execution) software.
• Mobile phone, tablet, or PC operation via network connection.
• Modular hardware structure for customizable configurations.
• Software Communications Architecture (SCA) framework for rapid deployment of new features and applications.
• Open modular architecture for easy integration into various platforms and systems
- • Reliable FAR Part 43 Appendix ‘F’ ERP and MTL testing in high multi-path environments
- • Provides >20 dB of antenna isolation for Mode S transponder altitude and diversity tests
- • Reduces interference with air traffic control and nearby aircraft
- • Rugged design for ramp use
- • Fits most ‘Shark Fin’ L-Band antennas
- • Quick action antenna grip/release action
- • Uses a precise non-contact air-solvent-air sequence to blast and remove contamination particles
- • Comprehensive selection of precision cleaning tips for most fiber connector types
- • High performance air filter system
- • Hassle-free solvent management
- • Additional connections for foot activation pedal & backplane handset extension.
All features from the existing IFF-45TS will be carried over, including:
- • Mode 5 testing without actual cryptographic applique and keys using integral mode 5 emulator
- • Supports DoD AIMS 04-900A Option A - KIV-78 and QRTK6 NG (with Airbus DS QRTK6 NG adapter) and Option B - KIV-77 and SIT-2010 crypto appliqués, KIV-79
- • Separate connections for direct or over-the-air testing
- • Test ranges of up to 3 km with appropriate antennas
- • ADS-B Out
- • Over-the-air platform testing of MK XIIA equipment including Mode 5, ADS-B beacons and TACAN interrogators
- • Provides >20 dB of antenna isolation
- • <1 dB repeatability
- • Supports GPS antennas up to 14 inches in diameter
- • Rugged design for ramp use
- • Accommodates both phase and amplitude type antennas
- • Reliable, FAR Part 43, Appendix F, ERP and MTL testing in high multi-path environments
- • Provides >20 dB of isolation
- • Provides shielding for all transponder and ADS-B performance testing
- • Lower antenna adjustable support pole
- • Perform four-quadrant testing by simply rotating the bearing selector dial
- • TCAS bearing accuracy < 10 degrees
The VIAVI TestCenter D2 is a four-port OSFP Ethernet test appliance that generates up to 6.4 Tbps of traffic for 1.6T Ethernet, AI data-center fabric, RoCEv2, Ultra Ethernet, and Layer 2–3 validation.
- Provides four OSFP test ports and up to 6.4 Tbps of aggregate test traffic
- Supports 1.6T, 800G, 400G, and 200G Ethernet using 224 Gbps PAM4 signaling
- Supports IEEE-compliant RS-FEC, Auto-Negotiation, and Link Training
- Emulates up to 128 GPUs or network interface cards per port with RoCEv2, collective communication, and AI workload testing
- Supports Ultra Ethernet 1.0, Layer 2–3 protocols, routing, switching, MACsec, and data-center network validation
- • Interrogator coupler mounts over the aircrafts’ four element interrogator antenna array
- • Transponder coupler mounts over top and bottom transponder antennas
- • Interrogator coupler kit supports all blocks of F-16 aircraft
- • Transponder coupler kit supports all F-16 blocks except F-16A/B, blocks 10/20
- • Interfaces with most IFF ramp test equipment
- • EMI gasketing eliminates stray transmissions and interference
- • Modular architecture
- • Scalable from 2×2 up to 16×16
- • Freq Range: 380MHz to 3.85GHz
- • Low end extension down to 30MHz
- • High end extension up to 5.95GHz
- • Channel BW: 40MHz
- • Options 100, 200, 400, 600, 800, 1000 and 1200MHz
- • Doppler Shift: ± 4kHz
- • Options ± 12kHz and ± 1.95MHz
- • Delay 4msec
- • Option 2sec (40MHz) / 1sec (>40MHz)
VIAVI Communications/RF
VIAVI is a leading worldwide provider of highly specialized test and measurement equipment and microelectronic solutions.
VIAVI Solutions is proud of our industry-leading network solutions for Telecommunications Service Providers, Equipment Manufacturers, Enterprises, and Entities in fields of Government and Avionics. VIAVI is consistently #1 or #2 in the markets we serve, including: Fiber, Cable, Access, Metro and Transport, RAN-to-Core, LandMobile and Military Radio and Nav/Comm and Transponder. We offer end-to-end network visibility and analytics that help build, test, certify, maintain, and optimize complex physical and virtual networks.
Our optical specialty products division is renown for expertise in anticounterfeiting pigment materials, 3D Sensing, and optical filters – holding #1 positions in those markets as well.
The pioneering spirit at VIAVI continues as we light the path to 5G with innovative test and measurement products, and lead the way with 3D sensing technology.
📡 Communications / RF
Download Line Card
Document
