• • DoD AIMS 03-1000A (Change Notes 1,2,3) Mark XIIA certified
• • Supports DoD AIMS 04-900A Option A - KIV-78 and Option B - KIV-77, & SIT-2010 crypto appliqués.
• • Transponder Test Modes 1,2,3/A, C, S (EHS/ELS), 4, Mode 5 (Level 1 and 2
• • Interrogator Test Modes 1, 2, 3/A, C, S, 4, Mode 5, TCAS, ETCAS (Level 1 and 2)
• • DO-260B compliant; ADS-B Out test capability

• • Software-driven design allows for field updates for adding new features, capability or modifications due to industry changes
• • ADS-B Target Generator
• • ADS-B squitter encode/decode
• • DO-260, DO-260A and DO-260B data parsing
• • DO-260B canned tests available (option)
• • Generates ATCRBS/Mode S interrogations Multi-receiver test capability (option)
• • UAT TX/RX capability (optional)
• • Pulse and frequency measurement
• • 10.4 inch touch screen LCD display for operator control of all test set capabilities
• • Remote controlled via GPIB or Ethernet
• • Two independent transmitters and receivers
• • TX/RX data logging capability
• • Full diversity testing capability
• • Data parsing in engineering units

• • Configurable test capability
• • Intuitive user interface
• • Software defined applications
• • Remote operation
• • Android™ and iOS® compatible
• • Guided test for Navigation applications
• • Built-in GPS Receiver
• • International test configurations

• • MK XIIA AIMS certified for Level 1 and Level 2 
• • Accommodates DOD AIMS 04-900A Option A (KIV-78) and Option B (KIV-77)
• • Dual I/O for diversity testing of transponders or SUM/DIFFERENCE on interrogators
• • Separate connections for direct or over-the-air testing
• • Software defined radio design allows waveform flexibility and future growth potential
• • Dual signal generator design allows coordinated signal production for interference and echo testing
• • Remote interfaces consist of RS-232, Ethernet and GPIB
• • GUI allows easy access to test features
• • Industry wide use in development and end item testing of transponders and interrogators

All features from the existing IFF-45TS will be carried over, including:

• • Mode 5 testing without actual cryptographic applique and keys using integral mode 5 emulator
• • Supports DoD AIMS 04-900A Option A - KIV-78 and QRTK6 NG (with Airbus DS QRTK6 NG adapter) and Option B - KIV-77 and SIT-2010 crypto appliqués, KIV-79
• • Separate connections for direct or over-the-air testing
• • Test ranges of up to 3 km with appropriate antennas 
• • ADS-B Out 
• • Over-the-air platform testing of MK XIIA equipment including Mode 5, ADS-B beacons and TACAN interrogators

• • IFF Modes 1 & 2
• • TACAN/DME interrogator testing
• • Military E-TCAS
• • Transponder Auto Test (DO-181E)
• • Automated ADS-B AC 20-165B surface/air performance testing
• • ADS-B (Out) monitor and decode
• • ADS-B (In) target generation
• • UUT parametric tests
• • User programmable TCAS scenarios
• • Altitude encoder
• • Over-the-air, direct, or coupled testing
• • Battery operation for 6 hours plus

• • Software-driven design allows for field updates for adding new features, capability or modifications due to industry changes
• • TCAS and ADS-B Target Generator
• • Simulates 32 dynamic and 568 static ADS-B/TCAS targets at 1090 MHz in scenario mode
• • Simulates 32 dynamic and 1,500 static UAT targets at 978 MHz as airborne or ground link messages ¹
• • Simulates blocks of up to 1,000 messages for Ground Station and TCAS messages at 1030 MHz ²
• • ADS-B squitter encode/decode
• • More test capability than any tester in the market, all packed into one box
• • Pulse and frequency measurement Transponder test option for Modes A, C, S
• • Optional Command set emulation for SDX-2000, ATC-1400A and S-1403DL
• • 10.4 inch touch screen LCD display for operator control of all test set capabilities or can be remotely controlled via GPIB or Ethernet
• • Four port antenna simulation
• • Hybrid surveillance
• • Six independent transmitters and two receivers
• • Data parsing for analysis 

¹Requires RGSNGOPT10 Transponder, RGSNGOPT14 Multi-receiver, or RGSNGOPT13 UAT options 

²Requires RGSNGOPT14 Multi-receiver

• • Accommodates both phase and amplitude type antennas
• • Reliable, FAR Part 43, Appendix F, ERP and MTL testing in high multi-path environments
• • Provides >20 dB of isolation
• • Provides shielding for all transponder and ADS-B performance testing
• • Lower antenna adjustable support pole
• • Perform four-quadrant testing by simply rotating the bearing selector dial
• • TCAS bearing accuracy < 10 degrees

• • Reliable FAR Part 43 Appendix ‘F’ ERP and MTL testing in high multi-path environments
• • Provides >20 dB of antenna isolation for Mode S transponder altitude and diversity tests
• • Reduces interference with air traffic control and nearby aircraft
• • Rugged design for ramp use
• • Fits most ‘Shark Fin’ L-Band antennas
• • Quick action antenna grip/release action